6.4 Shutdown / halt of the router
To shutdown the router device, first you have to reboot by the
System / Reboot
menu.
When all the three LEDs blinks at once, the router is restarted and can be switched off
safely as soon as you can
–
pull out the power connector from the 230V AC electricity
plug.
Attention!
Never stops the router without requesting the reboot process, and do not remove
the power socket without restarting the router before this action!
6.5 Reset the router
When the router is not reacting or it was not possible to configure properly, push in the
Reset
titled low-case button for 10 seconds
–
by a sharp and thin object. Then the router
will be restarted by the factory configuration, whereas the LED lights will assign it. After
a few minutes, the router will be available and accessible on its default address.
Configure the router in its web interface!
6.6 Password change
Open the
System /
Administration
menu.
At the
Router password
you can
fill the new
Password
and again to the
Confirm
password
fields. You will be able to login further by this new password.
