You can also use the
button to add additional phone numbers and select the
reboot
command for the phone numbers.
Press the
Save & Apply
button to save the settings.
5.14 Run commands remotely (SMS config settings)
You can execute commands on the router remotely when an SMS message was sent to
the router’s SIM phone number
.
To set these remote control commands, open the
Network / SMS Config
menu.
First you can see the
Phone Book
where you can define or
phone numbers.
Then you have to
Enable
the selected phone number.
At the
SMS commands
part you can choose preset commands by selecting them for
the number.
In the case of an SMS from a preset phone number, the router runs the preset command
(s) assigned to the phone number: e.g.
Reboot
For other commands, the router returns the information in a reply SMS message (e.g.
when sending the “
info
” command
in SMS, the router sends the firmware version
