1.
Connect the
microfit
connection
power connector
(1) when the router begins its
operation, where the LED lights will be signing and inform you about the current
status of the device.
2.
When starting the device
(at power on)
–
or in case of rebooting
–
all the three
LEDs of the router
will active for a few seconds.
LED1
LED2
LED3
3.
Then the
LED1
light is lighting continously by
green
, which signs that the system
is during loading (boot progress).
LED1
LED2
LED3
4.
The system start requires about 1-2 minutes, while the device loads the necessary
modules or the operation and prepares the web configuration user interface
–
the
LED2
will sign it. Then the web interface will be availble for login.
5.
Configure the
device’s wireless internet module settings
(SIM and APN data on
the router web interface)
for the cellular internet connection
–
otherwise the
router will be restarting in ever 10 minutes.
6.
The modem registration to the cellular network is signed by the
LED3
flashing
after the settings. If it was succesful (to register the SIM card data to the network)
then the
LED2
will lighting, which shows that the router can access the cellular
network already.
LED1
LED2
LED3
9-32V DC power voltage input (interface nr. 1) should be used by the DC
powering with the microfit connection 12V DC power adapter, or you can use
alternatively 9-32V DC power voltage with own cabling (follow the pinout hints).
