R200
Industrial Cellular Router User Manual
www.wlink-tech.com
45
3.8
“RST” Button for Restore Factory Setting
If you couldn
’t enter web interface for other reasons, you can also use this way.
For R200 Series, “RST” button is on the left or Ethernet port, for R200 Series, the button is
on the left of NET light. This button can be used when the router is in use or when the
router is turned on.
Press the “RST” button and keep more than 8 seconds till the NET light stopping blink.
The system will be restored to factory.
Table 3-19
System Default Instruction
Parameter
Default setting
LAN IP
192.168.1.1
LAN Subnet Mask
255.255.255.0
DHCP server
Enable
User Name
admin
Password
admin
After reboot, the previous configuration would be deleted and restore to factory
settings.
