R200
Industrial Cellular Router User Manual
www.wlink-tech.com
19
Figure 3-5
Routing Setting
Table 3-5
Routing Setting Instruction
Parameter
Instruction
Destination
Router can reach the destination IP address.
Gateway
Next hop IP address which the router will reach
Subnet Mask
Subnet mask for destination IP address
Metric
Metrics are used to determine whether one particular route should
be chosen over another.
Interface
Interface from router to gateway.
Description
Describe this routing name.
Step 2
Please Click “ Save “ to finish.
3.3
WLAN Setting
It’s mainly for router which support Wi-Fi, you can modify and configure WLAN
parameter through Web GUI, below is the common setting
3.3.1
Basic Setting
Step 1
Click “WLAN->Basic Setting” to configure relative parameter
