WLINK WL-G530 Series, Руководство пользователя

Страница: 16 / 87

WL-G530 Series Router User Manual
16
Table 2-2 WAN Setting Instruction
Parameter Instruction
Enable Modem Enable/Disable 5G mode.
Use PPP ECM dialup as default. PPP optional.
ICMP check If enable ICMP check and setup a reachable IP address as
destination IP, the router will reconnect/reboot once ICMP
check failed.
Cellular Traffic Check The router will reconnect/reboot once there’s no Rx/Tx data.
CIMI Send to Send CIMI to a defined IP and port by TCP protocol.
SMS Code Remote control the router by SMS. Only the configured SMS
code will work.
Operator Lock Lock a specified operator for the router by MCC/MNC code.
Dual SIM Mode
【
Fail Over
】
Two SIM cards mutual backup. Once SIM1 failed,
it’ll switch to SIM2 and work on SIM2, and vice versa.
【
SIM1 Only
】
Only SIM1 works.
【
SIM2 Only
】
Only SIM2 works.
【
Backup
】
SIM1 is the primary SIM. Once SIM1 failed, it’ll switch
to SIM2 and work on SIM2 for a specified period of time, then it
switches back to SIM1.
Connect Mode
【
Auto
】
The router will automatically connect to 3G/5G networks
and give priority to 5G.
【
LTE
】
Router will connect to 5G only.
【
3G
】
Router will connect to 3G only.
Pin Code Some SIM cards are locked with a Personal Identification Number
(PIN) code in case they are lost or stolen.
APN A PN is provided by local ISP, usually CDMA/EVDO networks
do not need this parameter.
User
SIM card user name is provided by ISP
Password
SIM card password is provided by ISP
Auth. Type
Auto/PAP/Chap/MS-Chap/MS-Chapv2 authentication optional.
SIM Local IP Address
Fix SIM IP. The feature is available if carrier can provide this service.
ICMP Check and Cellular Traffic Check are alternative.