WLINK WL-G530 Series, Руководство пользователя

Страница: 9 / 87

WL-G530 Series Router User Manual
9
2
Router Configuration
WL-G530 Series routers support GUI and CLI configuration. This chapter introduce GUI
configuration via Ethernet port, if need CLI configuration guide, please contact our
technical support department by email: support@wlink-tech.com.
2.1
Local Configure
The router supports to be configured by local Ethernet port, you could specify a static IP or
set as DHCP. The default IP address is 192.168.1.1
，
subnet mask is 255.255.255.0,
please refer to following.
Step 1 Click “start > control panel” , find “Network Connections” icon and double click it to
enter, select “Local Area Connection” corresponding to the network card on this
page. Refer to the figure below.
Figure 2-1
Network Connection
Step 2 Obtain a IP address automatically or set up IP address,192.168.1.xxx(XXX can be
any number between 2
～
254)
Step 3 Run an Internet Explorer and visit “ http://192.168.1.1/ ”, to enter identify page.