Wiznet WIZ610wi, Быстрое руководство по установке

Страница: 7 / 11

2-4. Serial-Wireless Configuration
Step 1.
Serial Parameter Setting
Enable the status of “Serial to Wireless LAN” configuration
Input the serial parameters to communicate with the serial device.
Protocol: Select UDP or TCP
Mode : Select a mode (Server, Client, Mixed)
Server IP/Port : At the Client or Mixed mode, you should set the server IP address.
WIZ610Wi will try to connect to this server IP address.
Configure Baud rate, Databits, Parity, Stopbits, Flow Control.
2-5.
Testing
Step 1.
Serial to Wireless Gateway Test
Open a terminal program of your choice on your PC (ex: Hyper Terminal). Please set the
same baud rate as the WIZ610Wi.