1.
Hardware Setting
Step 1.
Connecting Ethernet Cable
Connect WIZ610Wi evaluation board to PC by using the UTP Cable.
You can use any types of UTP cable (direct or crossover cable).
Step 2.
Connecting Serial Cable
Connect WIZ610Wi evaluation board to your PC by using the DB9 female serial cable.
Step 3.
Connecting Wireless LAN Antenna
Connect the wireless LAN antenna to the U.FL connector of WIZ610wi.
The antenna should have pigtail.
2.
Software Setting
2-1. The Configurations WEB Page
Step 1.
Setting up the IP address of the PC
The default IP address and Subnet Mask of WIZ610Wi are 192.168.1.254 and
255.255.255.0 respectively. Please configure the IP address of your PC as
192.168.1.XXX and Subnet Mask as 255.255.255.0.
Step 2.
Connecting Configuration Page
Open the web browser on your PC and input the IP address as “192.168.1.254” to
connect to the configuration page. Please enter the ID and Password
(
Default ID: admin/ Password: admin)
2-2.
Network Setting
To establish a Wi-Fi communication, the devices in the same network must have same values in
the parameters of IP address level, SSID, Channel, Encryption. For the detail, refer to below
figure.
메모
[q1]:
Full name of this
connector no idea what you
mean
메모
[q2]:
delete
메모
[q3]:
Don’t know what is
address level……
Содержание WIZ610wi
Страница 2: ...C CL LI IC CK K...
