Wiznet WIZ610wi, Быстрое руководство по установке

Страница: 5 / 11

Step 1.
Wired Network Setting
Please set your IP address, Subnet Mask and Gateway of your WIZ610Wi. The default
IP address is “192.168.1.254”.
Step 2.
DHCP Setting s
Select if you use DHCP function or not, and configure the ‘DHCP Client Range’.
When WIZ610Wi is set as DHCP server, it operates as below according to the
operation mode.
AP Mode : If there is another DHCP server operating at the upper level in the network,
it assigns IP address to the client, but does not to WIZ610Wi. If there is not any other
DHCP server, WIZ610Wi assigns IP address.
Gateway Mode : In this mode , WIZ610Wi is a bridge for Ethernet to the MII interface.
Regardless of DHCP server operating at the upper level, WIZ610Wi assigns IP
address to the client.
Client Mode : If WIZ610Wi is set as Client mode, it does not operate as DHCP Client.
The application board directly acquires IP address from DHCP server.
2-3. Wireless Setting
Step 1.
Please configure the operation mode of WIZ610Wi. You can select one of modes
(Access Point, Gateway, and Client)
Step 2
. Please setup the following parameters: SSID / Channel Number/ Data Rate / Security /
메모
[q4]:
Don’t understand
what you mean
메모
[q5]: Don’t use
abbreviation
메모
[q6]: Confusing Why is
this in the DHCP setting