IR Intelligent Speed Dome Camera User Manual
- 8 -
5. Function Setting
5.1 Setup / Calling For Preset.
Preset function refers to through controlling equipment setting / call IR dome position
parameters of the horizontal Angle and vertical Angle, by storing in digital form to the IR dome,
when needs to call these parameters, adjust the IR dome to preset a set state. Operator can control
it convenient and efficient through controlling keyboard and other devices to set/call preset
position. This IR dome camera supports 256 presets.
（
1
）
Set preset position
Make the IR dome moved to the corresponding position by controlling keyboard, DVR and
other control equipments
，
You can refer to the Preset function of controlling keyboard or DVR
to process preset settings after using the zoom buttons of the controlling keyboard, DVR etc
controlling devices to adjust Multiples of the lens to right angle, and enter the corresponding
number of preset position
Example: Using a type of controlling keyboard to set No.1 preset position
a
、
Move camera to the need position by joystick. Make the lens step to the angle in demand by
pressing the key “zoom”
b
、
Enter“1”key;
c
、
Press “SHOT” key;
d
、
press and hold the “smart” key of the joystick.
e
、
Press “ON” key;
（
2
）
Call preset position.
Refer to the calling preset function of controlling keyboard or DVR to process preset calling,
and according to the required preset position number to call
Example;Using a type of controlling keyboard to call No.1 preset position.
a
、
Enter“1” key;
b
、
Press “SHOT” key;
c
、
Press “ACK” key;
5.2 Calling For Cruising Function
Auto cruise is to set the cruise routes arbitrarily ,only an external command can let the dome
camera according to the specified route to make a tour automatically
，
and staying in the
corresponding preset position. There are 4 auto cruise routes for the IR dome camera
，
Each cruise
lines can store up to 16 presets at most.
（
1
）
Calling the auto cruising routes
By controlling keyboard or DVR to implement the commands to “call 71 preset position”
，
it
can makes the speed dome camera auto cruise as your preset; As calling“72 preset”, it will auto
cruise the second cruise routes
。
Please see the quick operate sheet for the 4 cruises.
Example;Use one controlling keyboard to call the first cruise route.
a
、
Setting the presets you needed 1—16 preset;
（
see the operation 1
）
b
、
Enter“71”
c
、
Press “SHOT” key;
d
、
Press “ACK” key;