Wizard ON-AP6RK-33X-2M, Руководство пользователя

Страница: 10 / 21

IR Intelligent Speed Dome Camera User Manual
- 9 -
（
2
）
Stay time setting for preset position when auto cruising
It can set stay time for preset position as 4 /8 /10 /15 /20 Seconds when the IR dome camera
auto cruising. Operation method by controlling keyboard, DVR to implement the command “set
No.75 preset position” the stay time is 4 sec;“set No.76 preset position”
，
the stay time is 8 sec;Stay
time setting command for auto cruising reference as below table;
Stay time Set commands Stay time Set commands
4s Call
NO.
75 preset 8s Call
NO.
76 preset
10s Call
NO.
77 preset 15s Call
NO.
78 preset
20s Call
NO.
79 preset
Example: using a type of controlling keyboard to set the stay time as 8 sec
a
、
Enter“76”
b
、
Press “SHOT” key;
c
、
Press “ACK” key;
4 cruising routes of corresponding preset position number for cruise route and the relation table of
calling or delete command
Example;Use a keyboard to remove the preset position of the third automatically cruise routes.
a
、
Enter“73”
b
、
Press “SHOT” key;
c
、
Press “ACK” key;
Corresponding preset position number for cruise route and the relation table of calling command
Cruise route Call command Presets in cruise route
NO.1 Call
NO.
71 preset 1—16 presets
NO.2 Call
NO.
72 preset 17—32 presets
NO.3 Call
NO.
73 preset 33—48 presets
NO.4 Call
NO.
74 preset 240—255 presets
5.3 limit positions on left and right(A to B)
、
360 degree scan
、
setting and remove the setup of
scanning speed.
The IR dome uses the conductive ring and photo electricity to limit position
，
it can get
through the controlling keyboard and DVR to set the left and right rotation position of the dome.
and automatically scan between the limit position of setting.
（
1
）
A
、
B scan setting.
By controlling keyboard or DVR to implement the command “set No.91 preset position”
after moved the dome to the right for the required position
，
Implementing the command “set
No.92 preset position” after make the dome rotating to the left to the position of left limit position,
left and right limit position is setting done. Then calling No.93 preset position, the dome just
running between these two points only.
Example: use a type of controlling keyboard to set limit position on left and right
a
、
Press the key “set preset”, Then make the camera moved to the need position by shaking
joystick.
b
、
Enter“91”;