IR Intelligent Speed Dome Camera User Manual
- 6 -
3. Cable Definition
Signal, power supply cable connection, please reference following chart:
4. Address, Protocol, Baud Rate Setting
The IR dome camera is built-in decoder board, through decoder to set the address, protocol,
baud rate settings,realized PTZ and camera lens control of dome camera. This product designed
the dial switch located on the sphere, given the set of convenient and stability, there is a piece of
gusset plate under the ball cover which can open and close at any time. Open the gusset plate can
see one 8 dip switch and one 4 dip switch.
SW1-Dip switch for the dome address
SW2-Dip switch for the dome protocol
4.1 Dome Address Setup
No.1~ No.8 of SW1 are used to set the dome address, you can set address codes within the
