Original operation manual
29
AirlessPhoenixGX_BA_en_1803 • 0550010-en • jw
Transport, installation, and assembly
4 Transport, installation, and assembly
The machine left the factory in faultless condition, packaged
correctly for transport.
Check the machine at the time of receipt for any transport
damage and for completeness.
4.1 Transport
When transporting the machine, observe the following information:
➤
When loading the machine ensure sufficient load-bearing
capacity of the lifting gear and lifting accessories.
The dimensions and weight of the machine can be found in the
technical data and type plate.
➤
To lift and load the machine, secure the machine (high pressure
pump incl. frame and/or additional accessories) properly on a
pallet.
➤
Do not transport any unsecured objects (e.g. material drum,
tools) with the machine.
➤
Never stand under suspended loads or in the loading area.
There is a risk of death here!
➤
Secure the load on the transport vehicle to prevent sliding and
falling.
If the machine has previously been in operation, please observe
the following:
➤
Disconnect the entire energy supply to the machine – even for
short transport distances.
➤
Empty the machine prior to transport – residual liquids may still
leak out of the machine during transport.
➤
Remove all loose parts (e.g. tools) from the machine.
