19
WT-218 GSM Car Alarm System
WT-218 – USER MANUAL – Rev.1 – Technical Support:
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD
(4)
Put the SIM card into the unit.
At first, you need make sure that the battery switch is off. This is very important
to keep your SIM card from damage. Beside the SIM card entrance, there’s small
hole which is a button. Press the button by some tools like a pin, the frame will
be out and put the card into it as the shape and the metal part outside. Connect
the unit with the vehicle power and turn on the system battery.
(5)
Test the function one by one.
Transmitter and the phone call. You can test it followed the function introduction
(6) Put everything the proper place including the cables and the main unit. You’d
better hid all the things very well, under the seat or somewhere. After that,
nobody and you don’t believe you had installed a powerful car alarm that feels
great!
Problem 1:
Short distance of the remote controller
Solution:
(1)
Inspect if the remote controller doesn’t have enough power.
(2)
Inspect if some barriers like solar membrane obstruct transmission of the signals.
(3)
Inspect if there are any interruptions of other similar frequency signals
Problem 2:
Now power when call the system
Solution:
(1)
Check whether net signals are OK.
(2)
Check whether SIM Card touches properly.
(3)
Check whether cut off the power source and the back-up battery when inserting
the SIM card
(4) Open the ACC, meanwhile press the emergency button for 5 times, direction
lights flash 3 times, the system will reset again
FREQUENT ASK QUESTION
