13
WT-218 GSM Car Alarm System
WT-218 – USER MANUAL – Rev.1 – Technical Support:
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD
(c)
Foot brake to trigger alarm
Under system armed status, pulled foot brake will trigger alarming.
Direction lights flash for 25 seconds, and siren will chirp at the same time,
the system will call the programmed alarm phone numbers, after answering
the call, voice prompts “engine started” for 5 times, and then enter into
main operation menu.
Enter into sub-menu and choose “enable/disable the automatic arm function
press (3) power-off alarm”
(3) No power alarm
If the standby battery is on, Cut off the main unit’s power source, the system will
call the programmed alarming phone numbers automatically, after answering the
call, voice prompts “system power off” for 5 times, and then enter into main
operation menu
(4) Emergency help
(a)
By remote controller
Under system disarm status and vehicle started, press the on the
remote controller for at least 3 seconds, LED will on continuously, directions
lights will flash, siren will chirp continuously, and the oil and electricity
circuit will be cut off after 10 seconds, system will call the programmed
emergency phone number automatically, after answering it, voice promotes
you “Emergency help” for 5 times, and then enter into main operation menu
(b)
By emergency button
Under system disarmed status, press the emergency button above 2
seconds, system will call the programmed emergency phone number, after
answering the call ,voice prompts “Emergency help” for 5 times, and then
enter into main operation menu, there is no sound and lightning alarming
(5)
No answering for the alarm call
If no answer to the first controlling phone number, the system will dial the
second one automatically, if still no answer, system will return to the first
controlling phone number, and system will turn to calling these two numbers till
some answer to the call
