12
WT-218 GSM Car Alarm System
WT-218 – USER MANUAL – Rev.1 – Technical Support:
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD
(1) Shocking alarming
(a)
Siren & light alarming
Briefly press the in remote controller to make the main unit into siren &
light alarming status. After 25 seconds, trigger the system by shaking,
direction lights flash for 5 seconds, sire chirps desultory for 25 seconds, the
system will call the programmed alarm phone number, after answering the
call, voice prompts “shaking alarm” for 5 times, then enter into the main
operation menu.
(b)
Mute alarming status
Briefly press in remote controller to make the system enter into mute
alarming status. Under mute status, trigger the alarm by shaking for the
first time, the direction lights flash for 25 seconds, 15 seconds later, trigger
the alarm by shaking again, direction lights flash for 25 seconds, the system
call for the programmed alarm phone numbers, after answering the call,
voice promotes you “Shaking alarm” for 5 times, and then enter into main
operation menu.
(2)
On-off Switch triggered alarming
(a)
Car door opened alarm
Under system armed status, open the door, the car door lock/unlock sensor
detect the intrusion, direction lights flash for 25 seconds, siren chirps at the
same time, the base unit call the programmed controlling phone number,
after answering the call, voice prompts “car door open” 5 times, then enter
into main operation menu
(b)
Car started alarm
Under system armed status, some one start the car illegally, the system
detect the intrusion, direction lights flash for 25 seconds, siren chirps at the
same time, the base unit call the programmed the controlling phone number,
after answering the call, voice prompts: “engine started”
4. ALARMING
