WITTUR WSG09, Руководство по эксплуатации и техническому обслуживанию

Страница: 17 / 47

21.05.2015
E
Gearless Synchronous Lift Machines
WSG09.X
Operating and maintenance manual J40003
Page 17
Date
Version
Subject to changes without notice!
10.3. Speed/Position measuring system
We can also provide other measuring systems on request.
We recommend the use of an appropriate
cable set to connect the measuring system
to the converter system. Cable sets can be
supplied as accessories.
The measuring system of the WSG09.X lift
machines is matched to the associated con-
verter. Do not change the adjustment as this
may make it impossible to use the motor.
Warning
Note
10.3.1 Measuring system ECN 1313 EnD at
2048
Operating voltage: 5V
Data interface EnDat
X1
1b 6a 4b 3a 2a 5b
Up Sensor 0V Sensor
Up 0V A+ A-
4a 3b 6b 1a 2b 5a
B+ B- DATA DATA CLOCK CLOCK
:
Lift machine of WSG09.X are equipped with ECN1313 EnDat
or ERN1387 encoder from Heidenhain GmbH. or encoder of
TS5213N2503 from TAMAGAWA
ECN1313 EnDat is connected via a 12-pole signal coupling
to the motor.
TS5213N2503 is connected via a 12-pole signal from the end
of the motor.
Resolution :