WITTUR WSG09, Руководство по эксплуатации и техническому обслуживанию

Страница: 22 / 47

21.05.2015
E
Gearless Synchronous Lift Machines
WSG09.X
Operating and maintenance manual J40003
Page 22
Date
Version
Subject to changes without notice!
12.3. Lubricating instructions
The main bearing (self-aligning roller bearing) has been lled
at the factory with a quantity of grease sufficient for the
nominal service life of the machine.
In order to use grease BME L-XDEBB2 to
lubricate the bearing according to GB/T 7940
M10x 1. Rotate the traction sheave when
insert the grease to the machine Lubricating
position is indicated in red cycle
The (NDE) secondary ball bearing is life-lubricated and not
provided with a re-greasing device.
12.4. Brake remote release for MRL solution
A brake remote release system would be required when it
is a MRL solution. Besides the standard brake, the system
additionally consists of cam mechanism, dragline subgroup and
operation mechanism.
1 As less bending as possible for dragline to
reduce the friction between dragline and
spool.
2 Radius of curvature ≥ 200mm at the area of
bending.
3 Place the system in an area where is easy
for operation. Either horizontal or vertical
installation is acceptable.
Caution
Note
12.5. Mechanical evacuation device
When the mechanical evacuation device ordered, a xed gear
is mounted on the traction sheave. In urgent case, insert the
Hand wheel into the supporting shaft then turn the traction
sheave by engagement to move the car