3.5
Assembling and adjustment of
housing (type B) and synchronisa-
tion
Both safety gears must operate synchro-
nous.
If there is safety gear delivered with safety gear
housing and synchronisation do the assembling
and adjustment as follows:
(
1
) Fit the synchronisation-axles (1) into the low-
er cross beam of the car frame - insert the
sliding-bushes (2) and fix the axle with the
delivered clamping-flats (3).
(
2
) Mount the safety gear housing (4) to the low-
er cross beam of the car frame (by means of
treated-plates (5) and screws M16x40)
Take care of tightening torque
Screw M16: 195Nm
(
3
) Fit the safety gear lifting lever (6) to the syn-
chronisation-axle-plate (1)
let a gap of 0,5mm by means
of the self locking nut
Blatt/
sheet
D729MGB.014
Datum/
date
23.05.2007
Stand/
version G-07.05.2018
Geprüft/
approved WAT/MZE
Änderungen vorbehalten!
Subject to change without notice!
Progressive Safety Gear
USG-25P
Operating Instructions
1
4
5
(
2
)
(
3
)
2
3
M16x40
gap ~0,5mm
1
6
(
1
)
