Blatt/
sheet
D729MGB.009
Datum/
date
23.05.2007
Stand/
version G-07.05.2018
Geprüft/
approved WAT/MZE
Änderungen vorbehalten!
Subject to change without notice!
Progressive Safety Gear
USG-25P
Operating Instructions
3.1
Mounting to the car frame
In accordance to the delivery content the manner
of how to mount it to the car frame is deviating:
•
Mounting with flat bars (see chapter 3.1.1)
(e.g. integrated directly to the upright)
•
Safety gear with housing (see Fig.1)
•
If mounting method is different, additional
documentation in included in delivery
In general:
Brake shoe and guide rail must be verti-
cally and horizontally lined up in parallel!
The following malfunction of the safety
gear may appear because of inaccurate
mounting:
•
unintended gripping of the Roller
•
no 100% braking extent
When mounting the safety gear, observe
the position of the overspeed governor
rope. The position of the lifting lever of
the rope at the safety gear cannot be
changed if the safety gear is built in.
<90°
<90°
Fig. 1: Alignment
<90°
3
Installation and adjustment
