Wittenstein Simco SIM2050D, Руководство по эксплуатации

Страница: 24 / 35

simco
®
drive SIM2050 Operating Manual
en-22 4022- D048047 Revision: 04
6.7.8 X8: Power supply
−
The logic supply is galvanically isolated from the intermediate voltage.
−
The safety input STO is galvanically isolated from the intermediate voltage.
Figure Pin
no. Signal name Function Input/
output
1 VCC24 Logic 24 VDC Input
2 STO Safe Torque off input Input
3 GND Logic reference
ground Input
4 STO GND STO
reference ground Input
5 BRAKE+ Holding brake + Output
6 BRAKE- Holding brake - Output
7 Motor temperature
Input
8 TempMot- Motor temperature
sensor - Input
9 External temperature
Input
10 TempExt- External
Temperature-
sensor - Input
Plug type on cable: TFMC 1.5/10-STF-3.5
Permissible wire cross-section: 0.25 .. 1.5 mm²
Stripping length: 10 mm
Connection Properties Unit Minimum
value Nominal
value Maximum
value
VCC24 Voltage V DC 12 24 60
Current @ 12V mA DC 500
Current @ 24V mA DC 220
Current @ 60V mA DC 100
STO Voltage V DC 12 24 60
Current mA DC 120
BRAKE+/- Voltage V DC 24
Current A DC 1,3
6.8 Fuses
•
The power supplies are to be secured with the fuses specified in the table:
Fuses
Logic supply (F2)
X8 (pin 1 + 2)
Fuse or similar with max. 4 AT
Power supply (F1)
X7 (pin 1)
Fuse or similar with max. 50 AT