31
Cleaning
Ordinary cleaning will extent the operational life of the treadmill.
Dust the treadmill off regularly. Do not forget to clean the four edges on each side of
the treadmill band itself and the edges on the frame. This prevents dust and dirt from
accumulating under the treadmill band itself. Use clean shoes.
The top side of the treadmill can be cleaned with a tightly wrung rag, and you can add some
dishwashing soap to that if you like. Water must not get into the treadmill’s framework or
into the underside of the treadmill band itself.
About the treadmill
The treadmill is made from special materials and has a strong pull power; the underlying
layer has a double shock-absorbing effect and a durable surface.
Adjustment of the treadmill
All treadmills are adjusted before leaving the factory. However, things may loosen up after
an extended period of use. The treadmill loosening up is not covered by warranty and is
generally considered to be part of a normal maintenance by the user.
Tighten up the treadmill. Take the hex key and pull the plug out of the socket. Use the hex
key to turn the rear right and left adjustment screws 1/4 rotation clockwise. Stand on the
treadmill and test if the treadmill band is tight enough. When it is sufficiently tight, it should
be possible to lift it 5-6 cm on each side. Make sure to keep the treadmill band centred.
Now reconnect it to a power source and let the treadmill run for a few minutes.
Repeat the above until the treadmill band is sufficiently tightened.
Important!
Please note that tighter is not better - it needs to be adjusted correctly. If the treadmill
becomes too tightly adjusted, it will reduce its lifetime.
EN
EN
