Page 34
Analyzer Q1
Witschi Electronic Ltd
17.3
TYPE Interfaces PRINTER
TYPE
General Data are sent without control code through a RS232 printer interface. If you
utilise the
Autoprint
software (available as an option) instead of the printer, you must
select this mode and set the baud rate (BAUD) of the interface to 38400.
Martel
Select this type if the thermal printer
Martel
(accessory) is connected.
Important! Set the baud rate of the RS232 printer interface to 19200.
START
Key
The measurement log printout is started manually by pressing the
key.
Auto
The measurement log printout is started automatically at the end of a measurement
cycle.
A graphical printout (
print screen
) is not possible with this setting.
DATE
ON
Date and time are printed in the measurement log.
OFF
Date and time are not printed.
HEADER
ON
The header is printed in the measurement log.
OFF
The header is not printed
HEADER
The device as delivered displays the following text:
Witschi Electronic AG
ANALYZER Q1
You can edit without restriction the two 22-character lines according to your requirements and
replace them with your own information. Procedure:
Use the rotary knob to select the line to edit. The line is underlined in blue.
Then press the rotary knob. The cursor is now located on the first character of the line
underlined in blue. You can select any alphanumeric character (including a space) by turning.
