Page 32
Analyzer Q1
Witschi Electronic Ltd
17
SYSTEM PARAMETERS
You can tailor the measurement sequence and the display according to your requirements by
suitably setting system parameters.
17.1
Procedure
Select the
System parameters
function in the main menu, then the type you want to handle. You will
be presented with the suitable parameter field by pressing to confirm the selection.
You can select the different parameters with a rotation. You will be presented with the parameter by
pressing and you can then change its value. Press again to leave the parameter.
Select the
↓
arrow to leave the parameter field
The setup possibilities are presented in the next chapters.
17.2
TYPE General
TIME
You can set up and correct the time of the built-in clock. If the Witschi GPS receiver is connected,
you can only adjust the Hour (in accordance with the time zone). The GPS receiver automatically sets
and synchronises minutes and seconds.
DATE
You can adjust or correct the date.
FORMAT
Euro
European format for displaying the date (dd.mm.yyyy) and time (24 hours).
US
American format for displaying the date (yyyy.mm.dd) and time (AM-PM).
----
No date and time display.
Date and time appear in the lower result field and in the measurement log printout.
LANGUAGE
You can choose one of the following languages: Deutsch, Français and English.
