WIRTGEN HAMM GRW 280, Руководство по эксплуатации

Страница: 23 / 218

General
General safety instructions
© HAMM AG 2011 2153734_02_BAL_GRW280_H195_en 23
Please adhere to the following instructions:
Please make yourself familiar with the machine's and the loading
vehicle's dimensions.
Wear reflective clothing.
For marshalling please use voice radio (e.g when loading with a
crane) or via hand signals (e.g. when reversing the machine).
602-07
1.09 General safety instructions
Safety instructions The safety instrucions are part of the operating manual. Please make
yourself familiar with these safety instructions prior to working with the
machine.
Regulations and Provisions
In addition to this operating manual, it is also necessary to adhere to all
laws, standards, regulations and provisions applicable in the country
of use and at the building site. The vandslism protection for the lighting
is not permitted by the StVZO (Germany) and must be removed when
travelling on public roads.
Additional information In case you should obtain additional technical and/or safety-relevant
information, they also must be adhered to and need to be attached to
the operating manual.
Electrical equipment
During works at the electrical system, the machine must be de-
energised at the battery isolating switch or by disconnecting the negative
terminal (ground strap) at the battery.
ROPS roll-over protection The machine frame must not be warped, bent or cracked in the ROPS
fixing area (deformation). The reinforcement elements of the cabin /
roll-over bar must not show rust, damage, fissures or open fractures.
All screwed connections of the reinforcement elements must comply
with the given specifications and must be screwed tightly to each other.
Observe starting torque values! Bolts and nuts must not be damaged,
bent or deformed. It is absolutely forbidden to modify or repair / level the
reinforcement elements in any way ( see page 213 sqq.).
610-05