WIRTGEN HAMM GRW 280, Руководство по эксплуатации

Страница: 214 / 218

Assembly instructions
Instructions for installation and retrofitting
214 2153734_02_BAL_GRW280_H195_en © HAMM AG 2011
General The ROPS cabin is a safety device in the case the machine tilts or rolls
over. It avoids that the driver is crushed to death based on the high self-
weight of the machine. In case the ROPS cabin was demounted (from
the machine) due to transport or repair reasons, the ROPS cabin needs
to be remounted according to instructions prior to operating the machine
again.
Assembly instructions ROPS
cabin
WARNING!
High self-weight of machine!
Risk for life: Machine may crush you to death if tilting or rolling over.
Operate machine only with the ROPS safety device installed
according to instructions.
With detectable defects of the ROPS safety device or of its fixation it
is not allowed to operate the machine.
002-34
Installation
1. Use appropriate lifting devices and hoisting equipment. Observe
weight (see type plate of ROPS safety device).
2. Lift ROPS cabin onto platform and align with fixing holes.
3. Screw ROPS cabin with operator platform. Observe specified starting
torque (see picture).
Visual test The machine frame must not be warped, bent or cracked in the ROPS
fixing area (deformation).
The reinforcement elements of the ROPS cabin must not show rust,
damage, fissures or open fractures.
All screw connections of the reinforcement elements must comply with
the given specifications and must be screwed tightly to each other
(observe starting torque values).
Bolts and nuts must not be damaged, bent or deformed.
It is absolutely forbidden to modify or repair / level the reinforcement
elements in any way.
619-00