WireTech 5000P-10x, Руководство пользователя

Страница: 15 / 28

this range: 0~99.
Audio2 Mode: select Stereo, Left, Right or Mono for soundtracks.
Audio2 Language: select the language of the audio.
5.2.4 ASI1
You can configure the settings of ASI1 in this menu.
ASI1 Source: Press the <ENTER>-key and use the < > or < >-key to roll up or down
to select the signal source of ASI output, there are 5 type of signal source optional:
CI De-encrypted: the de-encrypted transport stream from CI functional block
will be delivered to the ASI output port on the back panel.
TUNER: the transport stream from Tuner block will be delivered to the ASI
output port on the back panel.
ASI1 Input: the transport stream comes from ASI1 input port will be delivered
to the ASI1 output port on the back panel.
ASI2 Input: the transport stream comes from ASI2 input port will be delivered
to the ASI2 output port on the back panel.
Mux TS: the transport stream comes from internal Mux functional block will be
delivered to the ASI output port on the back panel.
(The Mux TS is valid only when the Mux function block is enabled and turned
on. Refer to section 5.2.7 and section 5.3.6 for how to set the Mux function
block.)
Press <ENTER>-key to save or press <EXIT>-key to scrap. A few seconds after the
source being selected, the TS will be delivered to the ASI output port on the back panel.
5.2.5 ASI2
The same configuration method like section 5.2.4
5.2.6 SDI
You can configure the settings of SDI output in this menu.
Audio PID: press the < > < >-keys to choose the audio PID from 1~4.
Embed Audios: there are 4 options: none, one&two, two, and one.
SDI Output Mode: configure output mode HD-SDI or SD-SDI
SDI H Offset: the range is 0~999
5.2.7 Mux
Note this Mux menu is showed only when the Mux function block is enabled and turned
on. And the Mux is alternative (refer to section 5.3.6 for how to turn on and set the Mux
function block).