WPS-300-NVR Installation Manual
Pg. 57
www.snapav.com Support: 866.838.5052
14.4.4-
A “server” in this case is an Email account or FTP site, either of which must be configured in
order to send or save notifications, snapshots or short video recordings. While either method
can be used, only Email is needed for notifications.
Allows for Email notifications to be sent based on various triggers
Enable
Alarm
Notifications will be sent when an alarm event
occurs.
Motion
Notifications will be sent when a motion event
occurs.
Note:
When NVR Record mode is Schedule, and Mail Schedule is
configured for Alarm Mail, Motion Mail or Both, these check boxes will
become checked and cannot be un-checked unless Mail Schedule is
changed to No Mail, or Record Mode is changed to Manual, or Alarm
Trigger.
Mail Server
Enter the SMTP server used for sending emails.
Corporate
Exchange
Accounts
Contact the network admin for server information
Personal Email
Accounts
Enter the SMTP server used to send emails.
Example: smtp.gmail.com
Note that the SMTP server must support and be
configured for POP3. Refer to the email provider for
details on using POP3 SMTP.
SMTP Port
Default port 25 may be used for most unsecure or anonymous accounts.
When using a Secure Connection, most servers use port 465 for SSL or port
587 for TLS. Refer to the email provider for details on using their SMTP
server.
Corporate accounts require contacting the network admin for port
information as t
he ports above may be blocked within the company’s firewall.
Username
Enter the name used to log into the SMTP server being used to send emails.
Example: [email protected]
Password
Enter the password used to access the email account SMTP server.
Sender’s
Mail
Address
This is used for notification purposes only and does not need to be the email
account being used to send emails. We recommend that a name be used
that identifies the camera sending the email.
Example: [email protected].
Note that some SMTP servers will strip this information and replace it with
the Username of the account regardless of camera configuration.
Receiver’s
Mail
Enter the recipients email address.
Bcc Mail
Enter an additional Email address to send notifications to. Note that this is a
Bcc; the main recipient will not see this address on their email.
