WPS-300-NVR Installation Manual
Pg. 52
© 2013 Wirepath™ Surveillance
14.2.3-
Use this menu to setup a schedule a Day/Time to save recordings to an FTP location.
Recordings are stored to the FTP location configured.
See section
Schedule
Split Screen with Days of the Week and Time of day for recordings. Enabled,
or Disabled days and times appear as colors as listed below.
No FTP:
No saving to FTP occurs during the scheduled day
/ time.
Alarm FTP:
Recording occurs, and is saved to the FTP
location when a connected alarm is triggered.
Motion FTP
: Recording occurs, and is saved to the FTP
location when a motion event is triggered.
Both:
Recording occurs, and is saved to the FTP, when a
motion event is detected, or a connected alarm is triggered.
Event Type
Selection
Buttons
Sets the cursor to the selected event type for assigning to a Day/Time.
Selecting Day/Time for Recording to FTP
A. Select the button for the type of event for recording.
E. Select the Day/Time to schedule in the Split Screen. Multiple
Days/Times can be selected by holding down the mouse button and
dragging the cursor over the area for the Days/Times.
F. Click on Save in the bottom right corner to save changes and return to
the Record menu.
G. Click on Cancel to abandon changes and return to the Record menu.
14.2.4-
Mobile
Enable or Disable the ability to view or record from a mobile device GUI. Must be
Enabled to access the NVR from the Wirepath WPS-IP iPhone, iPad or Android
apps.
Recommendation:
To ensure that a mobile stream is always available, we
recommend that this feature is left enabled.
