WPS-300-NVR Installation Manual
Pg. 50
© 2013 Wirepath™ Surveillance
14.2.1-
Use this menu to setup a schedule for recording video based on a preset schedule. Recordings
are stored on the HDD.
Schedule
Split Screen with Days of the Week and Time of day for recordings.
Enabled, or Disabled days and times appear as colors as listed below.
Full Record:
Recording occurs, and is saved to the HDD at
the scheduled day / time without a trigger.
Alarm Record:
Recording occurs, and is saved to the HDD at
the scheduled day / time when Motion is detected or a
connected alarm is triggered.
No Record:
No Recording occurs at the scheduled day / time.
Event Type
Selection Buttons
Sets the cursor to the selected event type for assigning to a Day/Time.
Selecting Day/Time for Recording to HDD
A. Select the button for the type of event for recording.
B. Select the Day/Time to schedule in the Split Screen. Multiple Days/Times can be
selected by holding down the left mouse button and dragging the cursor over the area
for the Days/Times.
C. Click on Save in the bottom right corner to save changes and return to the Record
menu.
D. Click on Cancel to abandon changes and return to the Record menu.
