Wireless Sensors, LLC
Ethernet Gateway Model GWAY-1100
Version 2.0 © July 2013
8 / 35
Host Name
—the factory default name for the GWAY-1100 is
SENSINET
. You can
change the name but it is limited to 16 UPPERCASE characters. This field is also includ-
ed in the XML file.
Enable DHCP
—check this box to automatically enable the GWAY-1100 to receive an IP
address and other network configuration information (such as gateway and subnet mask)
from a DHCP provider on your network. Note: this is the factory default setting of the de-
vice. If you elect NOT to enable DHCP, you must manually provide network adapter set-
tings for the device:
o
IP Address
—a standard IPV4 address. Note: if you configure the device with an
IP Address that is NOT a part of your network IP-range or class you will be unable
to access the device unless connected directly to it with a computer configured
with the same IP settings
o
Gateway
—the IP address of your network gateway
o
Subnet Mask
—the Subnet mask
o
Primary DNS
—the IP address of the primary DNS server
o
Secondary DNS
—the IP Address of a secondary DNS server. Note: this is option-
al
o
HTTP Port
—the port through which the GWAY-1100 will listen for incoming HTTP
requests. Normally programmed to 80
Save
—when you have finished making settings, click the “Save” button to commit the
settings to the device. This will cause the device to reboot
Note: At the time of initial boot-up, the device will look for a DHCP server. If one cannot be
found, the following default configuration settings will be applied:
IP Address: 169.254.1.1
Gateway: 169.254.1.1
Subnet Mask: 255.255.0.0
DNS: 169.254.1.1
POST Client Configuration
The
POST Client Configuration
page of
the Web tool allows you to configure the
POST Client and Proxy features of the
GWAY-1100.
To configure POST Client
Enable the feature by clicking the
check box
Select the URL of the HTTP POST
server. This field requires a fully
qualified URL and may include an
alternate port number.
