Wireless Sensors, LLC
Ethernet Gateway Model GWAY-1100
Version 2.0 © July 2013
5 / 35
INTERFACE
The GWAY-1100 has three types of interface:
Physical
—the ports, buttons, and other elements on the unit itself
Web
—the on-board Web application that provides real-time access of monitoring data
Programmatic
—the methods by which to interface directly with monitoring data
Physical
The physical interface of the GWAY-1100 includes five parts:
1-Wire Connector Panel: provides connectivity to 1-Wire sensors through three (3) RJ12
connectors. Each connector is a separate 1-
Wire bus
Power: a single micro USB connector.
The
power connector also has a USB port,
which may be used to configure the net-
work settings.
See section Configura-
tion/USB
Ethernet: connects the device to an existing 10/100-baseT network via a standard RJ45
connector
Power/Activity Indicator: flashes green to indicate the unit is receiving power and operat-
ing correctly, flashes yellow to indicate data activity
USB
The power / USB port may be used to configure the network settings via the internal flash drive.
This method would typically be used to configure the network settings to a fixed IP address with
the DHCP server turned off, as shown below. See the section Configuration/USB below.
Web
Each GWAY-1100 includes an integrated Web-server
that provides access to monitored data from any In-
ternet connected device such as a Web browser on
your PC, smartphone, or even an iPad
®
!
The Web interface provides you an easy way to con-
figure the network setting for the GWAY-1100 and is
accessible by navigating to its IP address. When you
connect the GWAY-1100 to your network it will auto-
matically request an IP address from an available
DHCP server if the feature is turned on, otherwise it
will use an IP address assigned by you. See configu-
ration section below.
Simply open a Web browser and enter that IP address to access the Web monitoring applica-
tion.
The Web interface provides the following menu items:
