4.5
IP Camera Motion Alarm Settings
Setting motion alarm parameters: include the scheduled time, sensitivity, alarm output, alarm delay, and
trigger image captures to your PC or the SD card (if one is present).
【
Schedule time setting
】
Set the time of motion alarm detection.
【
Alarm output
】
Alarming, alarm signal output.
【
Alarm delay
】
Alarming, clear the alarm time(the time of alarm signal output) automatically ,set the
time from 0~86400 seconds.
【
Alarm record in PC
】
Automatically recording image and stored in PC when alarming.
【
Alarm capture in SD Card
】
Automatically captures the image to the internal SD card (if one is
present). If there are continuous alarms, the interval between frames will be equal to the alarm
delay set. For example, if the alarm delay is 10 seconds; it will capture an image to the SD card
every 10 seconds. The image in the SD card can be downloaded to your PC. And when the SD is
full, the files will be replaced automatically.
【
Set motive block
】
Press the left button of mouse and drag to the test block.
【
All
】
set whole area as motive test area
【
Clr
】
clear all motive test area.
After setting, click the
【
save
】
button.
18/ 30
