4.6
IP Camera Sensor Alarm Settings
Setting sensor alarm parameters: included the schedule time, switch of the alarm, sensor type, alarm
output, alarm delay, alarm record on PC or alarm capture on SD card when alarming.
【
Schedule time setting
】
Set the time of sensor alarm detection.
【
Alarm output
】
Alarming, alarm signal output.
【
Alarm delay
】
Alarming, clear the alarm time(the time of alarm signal output) automatically ,set the
time from 0~86400 seconds.
【
Alarm record on PC
】
Automatically recording image and stored in PC when alarming.
【
Alarm capture on SD Card
】
Automatically capturing image and stored in SD when alarming. If
there are continuous alarms, the interval time of capturing is the delay time. For example, the
alarm delay is 10 seconds; it will capture an image stored in SD card every 10 seconds. The
image in SD card can be downloaded to PC when replay. And when the SD is full, the file will be
replaced automatically.
After setting, click the
【
save
】
button.
19/ 30
