Wintriss SmartPAC PRO Servo, Руководство пользователя

Страница: 135 / 228

SmartPAC PRO Servo User Manual 1147100
Chapter 5
– Program Mode
135
Viewing and Changing Sensor Settings
When you finish making settings for a sensor, you are taken to a screen that displays all your sensor
settings, similar to Figure 5-31.
Figure 5-31. Sensor Settings Screen
This screen also displays whenever you select a programmed sensor on the Die Protection Sensor
Menu.
To change sensor settings, do the following:
1. On the Sensor Settings screen, select the setting you want to change. The screen on which that
setting is programmed displays. For example, if you select the SENSOR NAME setting, the
Sensor Names screen (Figure 5-23, page 127) displays.
2. Change the setting on the displayed screen.
3. Press RESET when you are finished to return to the Sensor Settings screen.
4. Repeat steps 1 to 3 for each setting you want to change.
5. Press RESET when you have finished changing settings on the Sensor Settings screen. You are
returned to the Die Protection Sensor Menu.
Viewing the Sensor Summary
You can view a summary of the settings that have been made for all programmed sensors shown on
the Die Protection Sensor Menu, including the critical angle that has been set for the tool. To view the
summary, do the following:
1. On the Die Protection Sensor Menu, press VIEW SENSOR SUMMARY. The Sensor Summary
screen displays, Figure 5-32. This screen shows the sensor name, sensor type, stop type, and the
Ready signal On and Off angles for Green, Green Quick Check, and Green Constant sensors or
the stroke count for Green Special sensors.