Addendum
October 2021
1146200
SMI 2 User Guide
Rev. C
Page 23
Input Settings
Figure 18 - Input Settings
The ‘Input Setup’ provides access to settings associated with the Cycle Input, Run/Idle inputs, Rate
Calculation, and Analog Inputs.
The ‘Enable Inputs’ shows the current on/off state of the SMI’s inputs. The ‘Enable Inputs’ gives access
to the setting the way the SMI interprets state changes using the Cycle and Run/Idle inputs. Also, the
‘Enable Inputs’ is used to set the Scrap Sense Input, Decrement on Scrap, and
the Analog Channels.
