Winterthur Gas & Diesel Ltd. X52 Скачать руководство пользователя страница 41

Страница: 41 / 519

•

Rules for personnel

Wear the correct safety and protective equipment.

Make sure that you know the fire-fighting procedures.

Make sure that you know the health and general safety data and the environment protection
data.

Avoid direct contact with operating media or with hot parts.

Climb only on facilities as intended for this.

Never stand on pipes, valves or fittings.

Keep away from the running engine.

Keep ignition sources away from the engine.

Carry out all work carefully.

•

Rules for operation

Start the engine only if the engine is in good condition.

Keep the safety signs on the engine clean.

Keep unauthorized persons away from the engine.

Clean walk ways and stays regularly.

Open valves and shut-off devices carefully to prevent injury from released media.

Do not use water or cleaning fluid to clean the electronic components and control boxes.

•

Rules for service and maintenance

Keep the tools serviceable, eg calibrate gauges regularly.

Use the correct tools in a correct way, eg lifting devices and ropes.

Protect lifted parts with applicable materials.

Do work inside the engine with a safety person on the outside.

Put covers or protection on opened openings or on removed sealing faces.

Attach removed parts in the engine room to prevent movement of the parts.

Replace O-rings during an overhaul of components.

Make sure that after installation all pipes and items are fixed correctly.

Use lock wires, tab washers, and lock plates one time only.

Before you assemble screws and studs in very hot areas, apply on the threads a lubricant
that is resistant to high temperatures.

•

Rules for electric welding

Do electric welding near the engine only if the engine is stopped.

Set to OFF the electronic system, and wait at least one minute.

Disconnect electronic modules or sensors in a radius of 2 m from the welding place.

Make sure that there are no explosive fluids or gases in the work area.

Apply protection to electronic parts to prevent damage from sparks and heat.

Place the connection to earth as near as possible to the welding object.

Make sure that the welding cable has no loops and is not parallel to cables of electronic
units.

X52

AA00-0000-00AAA-012A-A

Operation Manual

Safety precautions and safety rules

Winterthur Gas & Diesel Ltd.

- 41 -

Issue 002 2018-11

Содержание X52








































































































































































































































































































































































































































































































































Результаты поиска

Содержание X52

Отзывы:

Похожие инструкции для X52

Бренды по названию

Популярные бренды

Winterthur Gas & Diesel Ltd. X52, Руководство по эксплуатации

Результаты поиска

Содержание X52

Отзывы:

Похожие инструкции для X52

Бренды по названию

Популярные бренды