Maintenance and care
12
Close the stopcock in the water pipe in the building.
Switch off the mains disconnector in the building.
8.1.4 Manual cleaning of the machine interior
Open the machine door.
Remove and clean the curtains.
Remove the lower wash arms (five jets):
Lift the locking mechanism.
Rotate the wash arm out of the guide and remove it in the
direction of the front side.
Wash out the wash arms if the jets are blocked.
Remove the upper wash arms (six jets):
Pull the wash arm downwards out of the catch and remove it in
the direction of the front side.
Wash out the wash arms if the jets are blocked.
Remove and clean the strainer.
Remove the filter (A) from the tank floor drain.
If the interior of the machine is dirty, clean the interior of the
machine with a sponge and a brush. If necessary, you can spray the
interior with a hose.
Use a brush to clean the filter (B) covering the pump inlet
opening. If necessary, the filter can be removed.
Reinsert the filter (A) into the tank floor drain.
Reinsert the strainer.
Reinsert the wash arms.
Reinsert the curtains. The curtains are designed (coded) so they cannot be inserted in the wrong position.
Both of the long curtains are located on the ends of the machine.
Close the machine door.
Содержание STR series
Страница 1: ...Rack conveyor dishwashing machine STR Operating instructions...
Страница 2: ......
Страница 23: ......