Operation
10
7.6 Routine checks
Check that the dishes are cleaned.
Check whether the fault indicator light on the control panel has lit up.
If so, do the following:
Switch off the machine and write down the error code.
Use the error table (
10.1) to see if you can remedy the error yourself.
Tell the Winterhalter service technician about the fault message if you cannot remedy the
fault yourself.
Only switch the machine back on after the fault has been remedied.
Check if the indicator light for lack of detergent or rinse aid on the control panel is lit.
If so, do the following:
Warning
When using chemicals, comply with the safety notes and recommended dosages printed on the
packaging.
Wear protective clothing, protective gloves and protective goggles when handling chemicals.
Do not mix different detergent products together.
Check whether there is detergent or rinse aid in the storage tanks. Top them up in time or
replace the storage tanks so that the cleaning result will not be negatively affected.
Check the interior of the machine.
Warning
Put on protective clothing and protective gloves before holding parts that are covered with tank
water (filters, wash arms, curtains, etc.).
Open the machine door.
Remove the strainer to clean it. There is no need to drain the water in order to do this.
Reinsert the strainer.
Close the machine door.
7.7 Switching off the machine
Press the on/off button (1).
The buttons are not lit up any more and the machine is switched off. The tank remains filled, but the
temperature in it is no longer maintained.
Warning
The machine remains live until the mains disconnector in the building is switched off.
Proceed as described in point 8.1 if you want to drain the tank and clean the machine at the end of a
working day.
Содержание STR series
Страница 1: ...Rack conveyor dishwashing machine STR Operating instructions...
Страница 2: ......
Страница 23: ......