Winterhalter PT-L, Руководство по эксплуатации

Страница: 6 / 44

Before working with the machine
4
3 Before working with the machine

Have the machine set up by an authorised service technician or your dealer (

‎
15).

Have the machine connected as per the locally applicable standards and the regulations by authorised
mechanics (water, waste water, electrical system) (

‎
16 and
‎
17).

After connecting the water and the power properly, contact the relevant Winterhalter dealer or your dealer
for the commissioning of the machine and for providing training in its operation. Get yourself and your op-
erating personnel trained in the operation of the machine.
4 Product description
4.1 Mode of operation
The boiler and the tank fill and are warmed up to the operating temperature after the machine is switched on.
During the heating phase, the lighting of the start button (3) changes gradually from red to green. When the
target temperatures are reached, the machine is ready for use. The start button lights up green.
The machine is fully automatic with programmes consisting of three steps: Wash, Drain and Rinse. Whilst a
washing programme is running, the start button gradually moves from blue to green.
4.2 Special equipment
The following special equipment is available:

Cool (only for glass washers)
Requirement: Connect the machine to the cold water.
In this process, the rinse is effected with cold fresh water.
The glasses are ready to use immediately after washing.
IMPORTANT The first rinses after activating this function will still be with hot or warm rinse water.
INFO This function can be deactivated at any time.

effect
Requirement:
Connection of the machine to water at a maximum 50 °C when the glasswasher is operat-
ed.
In this process, you wash with reduced tank and boiler temperatures.
Sustainable improvement of the kitchen climate and reduction of operating costs.
IMPORTANT Washing at these temperatures requires Winterhalter detergents and rinse aids which are
appropriate for this process.
INFO This function can be deactivated at any time.

EnergyPlus
Requirement:
Connect the machine to the cold water.
In the construction above the machine there is a fan motor and a heat exchanger. The fan draws the
moist, warm air (= vapours) out of the interior and transfers the generated energy to the cold inlet water
via a heat exchanger. A waste water heat exchanger provides an additional energy gain.
Sustainable improvement of the kitchen climate and reduction of operating costs.

ClimatePlus (PT-M and PT-L only)
Requirement: Connect the machine to the cold water.
In the construction above the machine there is a fan motor and a heat pump. The fan motor extracts the
moist, warm air (= vapours) out of the interior and transfers the generated energy to the cold inlet water
via a heat exchanger.
Air-conditioning effect on the kitchens and reduction of operating costs.

Automatic hood opening
The hood opens automatically after each wash cycle.

Integral softener (

‎
6)