Wintec LP-302, Инструкция по эксплуатации

Страница: 14 / 34

07
PRePARATIoN
Installing / Removing the Belt Clip
Installing the Belt Clip:
Place the belt clip to the corresponding grooves
on the back of the transceiver, and then clockwise screw it.
Removing the Belt Clip:
Anticlockwise turn the screws to remove the belt clip.
Installing the Additional Speaker/ Microphone (option)
Unveil the MIC-SP jack cover and then insert the Speaker/Microphone plug
into MIC-SP jack. If not use Speaker/Microphone,please cover the MIC-SP
jack
NoTe:
Do cover the the MIC-SP jack to keep transceiver waterproof.
1.
The transceiver is not completely waterproof while using the Speaker/
2.
Microphone