Wintec LP-302, Инструкция по эксплуатации

Страница: 28 / 34

21
Battery Save Setup
The transceiver can be set for saving battery to extend standby time .When receiving the carrier wave or doing the keypad
operations,,it will instantly exit battery saving mode and come into normal working mode .
OFF:Battery saving is disabled
1:2:The ratio between normal working state and battery saving mode as 1:2
1:3:The ratio between normal working state and battery saving mode as 1:3
1:5:The ratio between normal working state and battery saving mode as 1:5
1:8:The ratio between normal working state and battery saving mode as 1:8
AUTO: automatically adjust the time of saving battery
NoTe: The higher ratio between battery saving mode and normal working state ,the lower power consumption
of waiting .But it is possible can not receiving a part of signal which transmit by the other party.
PTT Tone
If this function enable ,press
[PTT]
key the transceiver will emits prompt voice.
TIPS:PTT tone only valid when the key tone in enable state.
Key Tone
Users can set up key tone function by programming software.Press
[PF1]
/
[PF2]
key emits corresponding key tone .
VoX Levels Setup
This function is used to setup the vox of transmiting voice. The higher level the bigger voice. User can set the desired vox levels
by programing software. the vox levels from 0-9 to choose .
NoTe:It need to start the vox function first if user want to set the vox levels ,otherwise the operation
is invalid.
BACKGRoUND oPeRATIoN