Wintec LP-302, Инструкция по эксплуатации

Страница: 13 / 34

06
PRePARATIoN
Installing / Removing the Li-ion Battery
Match the two grooves of the battery pack with the corresponding
1.
guides on the back of the transceiver, and then push it.
Press the battery pack until the release latch on the top of the
2.
transceiver locks. After hearing a “click” sounds, the battery has
been locked.
To remove the battery pack, slide up the release latch and remove
3.
the pack away from the transceiver.
Installing / Removing the Antenna
Installing the Antenna:
Screw the antenna into the connector on
the top of the transceiver by holding the antenna at its base and turning
it clockwise until secure.
Removing the Antenna:
Turn the antenna anticlockwise to
remove it.
4