Learning
The
LEARN
feature is used to supplement the preprogrammed code list. The
standard code list may provide most of the functions needed, but you can add a small
number of additional functions for your remote control, or you can add a new code
from a new remote control which is not in the code list.Under learning mode, you must
need to prepare another remote control that you will take the codes into this remote
control.You can select
LEARN KEY
to learn commands, or
DELETE KEY
to delete
learn commands, or choose
DELETE DEV
to delete all commands under a device, or
DELETE ALL
for all learnt commands under all device in learning category.
Learn a Command
1. Press a device key (e.g.
TV
) where you want to learn .
2. Press and hold the
SET
key for more than 3 seconds, then release it. Or you can
press
Learn
key for more than 3 Seconds then you can enter into learning mode
directly.
3. Scroll or key to
LEARNING
in the LCD menu, then press the
OK
key.
6
Device Set- Up
6.Then you press device key to select your desired operation device(e.g. TV) and then
press
OK
key, you must now enter the
3-digit device code
(e.g. 003 for Lifetec TV)
7.Press
OK
key to save it and LCD shows
SUCCESS
, and press
EXIT
key two times
to exit from the SETUP mode.
8. You check the function of the keys on remote control. If most keys on your new
remote control do not work properly, try another 3-digit device code (e.g. 010
…
) from
the list under the same brand. Repeat steps 3 to 7 until all the basic functions operate
correctly.
12:02
075
PM
TV
CODE SETUP
DEV SEARCH
SET 3S'
OK
TV
OK
DEV SETUP
VCR
075
048
OK
VCR
TV 003
Press code number. (eg.003)
DVE SETUP
SUCCESS
1S'