Wintal LRC8, Инструкция по эксплуатации, Страница: 10 / 15

TV 048
11:45 AM CODE SETUP
MACR02
SET UP
SELECT KEY SUCCESS
MACRO1
MACRO
MACRO1
ok
or ok
ok
ok
ok
Remark:
1. You can set up to maximum 10 commands in a MACRO.
2. Make sure all the keys can send out signals, otherwise even if you programmed
these keys inside the MACRO, it still can not work properly when you operate
MACRO function. You can check those keys by pressing them to see the relative
Device buttons flash or not before you set up MACRO.
3. Make sure the device must have relative conditions when you operate MACRO
function. For example the disc must be put in DVD player and a video tape must
be put in VCR when you like to play DVD or make a record by your VCR.
SET 3S'
10
Macro Function
MACR02
MACR03
Select the device and function key that you like
(eg. TV+POWER+AV,DVD+POWER)
Macro Function
Set up Macro
Macro function let you make sequent operation for your home theater.
You can set up a Macro by following below steps:
1. Press and hold SET key for more than 3 seconds, then release it.
2. Press the or key to select MACRO in the LCD menu, and then press OK key.
3. Press the or key to select the MACRO1 in the LCD menu (or Macro2 or
Macro3), then press OK key.
4. The screen shows SETUP, and then press OK key.
5. You can select the device and function key for a sequent operation that you like.
(e.g.
: TV+POWER+MUTE+AV, DVD+PLAY, VCR+RECORD
, etc. That means you
want turn on the TV and shut off its sound, switch TV input to AV port, at the same
time DVD start to play disc, VCR begins to record )
6. Press
OK key to save the setting, LCD shows SUCCESS then exit to current
setup state,
7. You can press any device key to finish set up or press the
EXIT key to last state
and use or to select other set up.