1. Turn on the device (e.g.
TV
) you would like to operate. If it is a VCR, Please insert
a tape.
2. Press and hold
SET
key on your remote control. Then press (simultaneously)
one of the device keys (e.g.
TV
)
3. Then release them, the Brand will be displayed on the screen.
4. You can press the or key to select the brand of your device (e.g. Your TV brand:
Life
)
5. Check the function of the keys. If none of the keys of your new remote control can
work, or most of the keys work improperly, please try another code by or key,
until all basic functions operate properly.
6. If you are satisfied with the code, just press
OK
key to save it. LCD shows
SUCCESS
and then finishes the set up.
TV 048
11:58
TV 010
12.00
ACCENT
023
ACME
ACME
004
010
SUCCESS
SET+TV
OK
OK
OK
AM
PM
Remark:
1.
To return to beginning status, press the
EXIT
key or the device key (e.g.
TV
, or
VCR...
)
2. You must point your remote control to the device that you want to control when you test the keys.
3.
OK, EXIT
is only used to set-up your new remote control during set up process. You can't
control your device as normal menu function at this moment until you quit from setting up.
4. If the device is locked, you must first unlock the device to set up.
Set-up by Auto Search
If set-up by
brand and the code
failed or you cannot find the brand name of your own
device in remote control screen, you may use the Auto Search to find the correct code
to operate your device.
1. Turn on the device (e.g. TV) you would like to operate. If it is a VCR, Please insert
a tape.
2. Press
SET
key on your new remote control for more than 3 seconds, then release it.
3. Press the or keys to select
CODE SETUP
in the LCD menu, and press
OK
key.
4. The screen shows the
DEV SEARCH
in the LCD menu, and press
OK
key, then
press device key to select your desired operation device(e.g. TV) and then
4
Device Set- Up
Direct Set - Up by Brand and Code
1S'