44
Fig. 37
Move cursor with
and
on the front panel and select item with
and
.
Channel number:
connect channel number of decipherer
RS-485 parameters:
Including baudrate, data bit, stop bit, parity bit, flow control, etc. These parameters
must be the same as those of PTZ Protocol.
PTZ Addr:
Each PTZ has one different address. Default system configuration: 001.
Protocol:
DVR had the following PTZ protocol: PELCO-D
、
PELCO-P2
、
PELCO-P1
、
W110
、
P3
、
PLD
、
ENKEL
、
YAAN
、
SONY
、
JC4116
、
PD-NW
、
PD-CONST
、
PIH-1016
、
KRE301
、
PELCO9760
、
LILIN
、
T3609HD
、
HD600
、
KTD
、
SAMSUNG
、
ELEC
、
PANASONIC
、
FASTRAX
、
DL-0001.
Speed:
PTZ turning speed. 01: Turning slower; 03: Turning faster Default system configuration: 02.
Vertical:
Reverse PTZ’s vertical field.
Horization:
Reverse PTZ’s horizontal field.
In the course of setting up the parameters, if the parameters needed to be set the same in all channels, you can
select ‘
ALL
’ after finishing the setup of parameters of one channel. The system will pop-on a dialog box. When
pressing ‘
OK
’, parameters setup for all channels will be achieved.
Section 15 Restore Defaults Setting
Enter “Main Menu
－
Advanced
－
Maintenance
－
Reset” as shown in Fig. 38
