15
Chapter III DVR Operation
Section 1 DVR Front Panel
Fig. 7
Name specification
Power switch
Run
Working indicator, flashing after boot normally.
HDD
HDD indicator, flashing when access HDD date.
ACTIVE
Network communication indicator, flashing when network is connected.
LINK
Network connection indicator, lighting constantly when network is
connected.
REMOTE
IR remote receive indicator, flashing when control this DVR with IR
controller.
ALARM
Alarm indicator, flashing when alarm is activated.
Record indicator 1-4ch record indicator (it lights when corresponding channel is recording)
Backup
Backup indicator, lighting constantly when backup is working.
1. Direction key “UP” 2. Display the status bar in preview mode
1. Direction key “DOWN” 2. Hide the status bar in preview mode
Direction key “LEFT”
Direction key “RIGHT”
ENTER
“OK” key
ESC “Cancel”
key
Menu Entering
system
menu
1.
4-screen display or the first channel full screen display
2.
Motion and Shelter area enable
3.
Select pane “1” in cover area setting
1.
4-screen display or the second channel full screen display
2.
Motion and Shelter area disable
3.
Select pane “2” in cover area setting
