SBC35-427/BIOS Settings
v1.0
www.winsystems.com
Page 8
8. Assuming the EC update program is named
Update.efi
, enter the
following command at the shell command prompt:
Update.efi
The EC update program begins executing.
9. When the update program completes, power cycle the platform to
force the new EC image to load and execute.
10. Verify that the EC update was successful by comparing the displayed
EC version in the BIOS with the version specified in the EC update
notification.
4.
BIOS Settings
This section provides details on the system parameters that are managed
by the BIOS. Details on the possible parameter values are included.
4.1
Entering the BIOS
Enter the BIOS by pressing
DEL
or
ESC
during POST. If you are running a
Windows 10 operating system and you cannot enter the BIOS during POST
by pressing either
DEL
or
ESC
, then follow the instructions below.
1. Press the
Windows
key on your keyboard and type “recovery options”
into the search box.
2. Press
Enter
to open the Windows Recovery settings.
3. Under Advanced startup, click
Restart now
.
The SBC35-427 restarts and boots into the UEFI menu
4. Click the
BIOS
button to enter the BIOS.
4.2
Main
The Main page of the BIOS displays general information related to the
current BIOS build, including the BIOS and embedded controller firmware
revisions. Information related to the system memory is also displayed on
this page.
System time and date are configurable on the main BIOS page. An
external battery is required to retain time and date if power is removed.
The following BIOS build information is available on the Main BIOS page.